Chestnut Brown Peel and Stick Wood Wall Panels
Warm chestnut tone with rustic wood grain across each plank.
You need 0 panels to cover 0 m² (incl. 10% waste)
Specifications
- Finish
- Chestnut Brown
- Range
- TimberStik
- Material
- Real wood, pre-finished
- Plank Size
- 128mm x 1180mm
- Plank Thickness
- 4.5mm
- Coverage Per Box
- 1.057 m²
- Backing
- Pressure-sensitive adhesive (PSA), peel-and-stick
- Application
- Walls, ceilings, feature walls, joinery
How to install
-
1
Prepare the wall
The wall should be flat, clean, dry, and free of dirt or dust. Avoid glossy or oil-based painted surfaces, and walls near water, high humidity, or direct heat. These conditions degrade the PSA adhesive. A light sand often helps the planks bond.
-
2
Measure and cut
Plan your layout and add 10% for cuts and waste. Cut planks from the front face, with masking tape along the cut line to reduce splintering. Any sharp fine-tooth saw gives a clean cut.
-
3
Peel and stick
Peel off the red backing to reveal the adhesive. Press the plank firmly against the wall. For a permanent install, add a fast-drying grab adhesive between the PSA strips before pressing.
-
4
Repeat with expansion gap
Continue across the wall, leaving a 1mm expansion gap between each plank for natural heat movement. Apply even pressure to every plank to ensure full adhesion.
Description
TimberStik Wood Wall Panel Range Key Features Easiest application wood panels available
Each Box Contains 1.057M2
4.5mm Thickness
Planks are 128mm wide with a length of 1180mm
This is an end-of-line, non-returnable product. For more information, please refer to our T&C's.
Overview Timberstik guarantees to transform your space with its range of rustic real wood finishes. Sustainability sourced and designed by interior experts, the TimberStik panels make for a perfect product if looking to transform that room into something special.
TimberStik requires no remedial work; all cleaning, sizing, and finishing have already been completed. Not only does this save you valuable time, but it also ensures consistent levels of quality, patina, and colour. Designed with ease of installation in mind, the panelling features peel and stick strips on the back. Suitable for installing on most interior surfaces, the TimberStik range is a simple way to redefine your space.
Chestnut Brown Finish A rich, deep finish that brings an earthy, warmth to a room. The dark chocolate tones are never too heavy when being complemented with orangy-red wood grain undertones. This finish is perfect for a feature wall or a whole room when accessorised with light soft furnishings such as sofas and curtains.
How to Install The TimberStik panels are fitted with a PSA backing, often known as a peel and stick, or pressure sensitive adhesive backing. Peel and stick panelling is great for a renter-friendly, temporary solution, but can be made permanent if you use a fast-drying grab adhesive or glue when installing. Read below for a quick guide on installing these panels:
Prepare your surface: Your surface should be flat, dry, and clear of dirt, dust and debris. Avoid installing on glossy or oil-based paints, as this can degrade the peel and stick backing. Do not install near water, high-humidity or heat sources, as this will also degrade the adhesive and panels. You may find a light sanding of the wall can help with the panel adhesion.
Measure your space: ensure you have enough panelling to cover your space. We recommend allowing an extra 10% for wastage and cutting the panels to fit.
Cut your panels: cut down any panels as required. We recommend cutting from the front face of the panel, and using masking tape along where you plan to cut to reduce the amount of splintering on the surface. Any saw will cut through these panels, although we advise using a sharp, fine-tooth blade for the cleanest cut.
Stick your panels in place: peel off the red backing to reveal the adhesive, and press the panel in place on your wall. If you plan to add additional adhesive to make the panels stay in place permanently, or to reinforce the adhesion, apply liberally on the back between the adhesive strips, and apply to the wall. Apply even pressure to ensure a strong adhesion.
Repeat step 4 step to cover your space: a simple, quick install! When installing multiple panels, we recommend allowing a small expansion gap between each panel, to allow for heat changes. 1mm is typically enough space.
Delivery and returns
Delivery options and timing vary by product. View the methods available at checkout.
30-day returns on all orders
Items must be unopened and in original packaging
Contact us to arrange a return
Notify me
Real wood, peel-and-stick simple.
Pre-finished real wood planks with adhesive backing built in. No sanding, no staining, no sealing. The planks come finished from the factory and ready for the wall.
Install over an evening with no specialist tools. Removable enough for renters, made permanent with a layer of grab adhesive when you want it for keeps.
How it works
Prepare the wall
The wall should be flat, clean, dry, and free of dirt or dust. Avoid glossy or oil-based painted surfaces, and walls near water, high humidity, or direct heat. These conditions degrade the PSA adhesive. A light sand often helps the planks bond.
Measure and cut
Plan your layout and add 10% for cuts and waste. Cut planks from the front face, with masking tape along the cut line to reduce splintering. Any sharp fine-tooth saw gives a clean cut.
Peel and stick
Peel off the red backing to reveal the adhesive. Press the plank firmly against the wall. For a permanent install, add a fast-drying grab adhesive between the PSA strips before pressing.
Repeat with expansion gap
Continue across the wall, leaving a 1mm expansion gap between each plank for natural heat movement. Apply even pressure to every plank to ensure full adhesion.
Reviews
Frequently asked questions
Trade pricing for professionals
Dedicated pricing, priority samples and a named account manager. Apply in 30 seconds.
Request your trade account
Fill in the form or call our trade team on 01525 851166. Most accounts are approved within one working day.
Why WVH®
Founded on craft.
Built for modern design.
Decades of experience supplying surface materials to the high-end automotive and marine industry. The same obsession with grain, finish, and consistency now defines every WVH® panel.
50+ years of expertise
Three generations of surface materials knowledge behind every product
Trusted by 5,000+ homeowners
★★★★★ Excellent · 5,000+ reviews on Trustpilot
UK shipping, 30-day returns
Free delivery over £49. Hassle-free returns on every order.
