Colour-wrapped acoustic slat panels in a cool concrete grey tone.
You need 0 panels to cover 0 m² (incl. 10% waste)
Trade pricing available. Join now
Select the finishes you'd like to try
Measure your wall height and width. Calculate how many panels you need using our coverage calculator.
Cut panels to size using a mitre saw or circular saw. Mark cutouts for sockets from the back of the panel. Sand any cut edges lightly.
Lightly sand any cut edges with fine-grit paper. Removes rough fibres and gives a clean, finished look.
Apply construction adhesive to the back of each panel. Press firmly against the wall, starting from the bottom. Use panel pins for extra hold while the adhesive sets.
Key Features Acupanel is the original acoustic slat wood panel. All stock held in our UK warehouse. Perfect for both residential and commercial environments. Backing felt material produced from recycled material. Quick and easy installation. Class-A superior sound absorption. Overview Acupanel is a beautifully designed strip decorative wall and ceiling panel which boasts high-quality acoustic properties. The panels can be easily applied to walls and ceilings, be it for domestic or commercial use. Modern styling personified in every way.
The colour Acupanel range is produced with a luxury quality, smooth veneer finish. Lamella strips with a clean, modern appearance are mounted onto a uniquely designed, recycled acoustic felt material. Fast and simple installation allows you to quickly transform any space.
As of the 26th May 2026, these panels now have a new and improved laminate finish. For details or assistance, please contact our Customer Service team.
Specification 240cm x 60cm
2400mm (H)
600mm (W)
19mm (D)
1.44m² Coverage
300cm x 60cm
3000mm (H)
600mm (W)
19mm (D)
1.8m² Coverage
Installation & Downloads The Acupanel range has been designed to be installed with ease. We recommend either screwing the panels straight into the wall, using the correct fixings, through the acoustic felt or if you are looking to increase the sound properties further, screwing them into batons. If installing on ceilings, the panels can be screwed straight into ceiling joists.
When cutting your panels, it's important to check where you are cutting in relation to the backing staples. If you cut the panels close to the staples, you may notice some slats lifting away from the backing where the panel has been cut. This is completely normal and is quickly rectified by adding additional staples through the backing felt or using a grab adhesive on the back of the slats.
Acupanel Technical Sheet Delivery The Acupanel range is fully stocked in our UK warehouse. We offer free delivery on our Acupanel range!
Can't Decide?
Try a Sample
Sample
Delivery options and timing vary by product. View the methods available at checkout.
30-day returns on all orders
Items must be unopened and in original packaging
Contact us to arrange a return
Each Acupanel® Concrete Grey panel pairs a top-surface laminate finish with a recycled acoustic felt core. The laminate carries a soft concrete-grey tone across the slat face, giving each wall a consistent, contemporary surface without grain variation. The colour is consistent, the surface softens light, and the acoustic core absorbs sound.
Built on 50 years of surface materials knowledge. The same precision engineering as our wood range, finished with a durable top-surface laminate. From residential spaces to commercial specification, the panel brings a quiet, architectural tone that painted finishes cannot match.
1
Measure your wall height and width. Calculate how many panels you need using our coverage calculator.
2
Cut panels to size using a mitre saw or circular saw. Mark cutouts for sockets from the back of the panel. Sand any cut edges lightly.
3
Lightly sand any cut edges with fine-grit paper. Removes rough fibres and gives a clean, finished look.
4
Apply construction adhesive to the back of each panel. Press firmly against the wall, starting from the bottom. Use panel pins for extra hold while the adhesive sets.
Dedicated pricing, priority samples and a named account manager. Apply in 30 seconds.
Fill in the form or call our trade team on 01525 851166. Most accounts are approved within one working day.
Why WVH®
Decades of experience supplying surface materials to the high-end automotive and marine industry. The same obsession with grain, finish, and consistency now defines every WVH® panel.
50+ years of expertise
Three generations of surface materials knowledge behind every product
Trusted by 5,000+ homeowners
★★★★★ Excellent · 5,000+ reviews on Trustpilot
UK shipping, 30-day returns
Free delivery over £49. Hassle-free returns on every order.
Our Acupanel slat wall panels have been carefully designed to effortlessly transform any space, enhancing the surroundings both visually and acoustically. The wood panels help to create an environment that is not only quiet but beautifully contemporary, soothing and relaxing.
The panels not only offer aesthetic refinement and superior acoustic dampening, but they are also produced using only environmentally friendly materials. All of the materials are sourced from certified sustainable sources— a complete environmentally friendly product.
Simply screw the panels straight into the wall, using the correct fixings, through the acoustic felt or if you are looking to increase the sound properties further, screwing them into batons. If installing on ceilings, the panels can be screwed straight into ceiling joists.
The Acupanel wall panels are shipped in boxes - if more than one panel is ordered, we pack two panels to a box.
All of our panels are available in a 240cm x 60cm size, with a selection of our panels are available in 300cm x 60cm and 360cm x 60cm sizes.
If you are looking to obtain a class A sound absorption, then we recommend installing the panels with batons. However, if you would like to have them for decorative purposes while still providing some sound absorption, we recommend screwing the panels directly into the wall through the acoustic felt backing using Black or Grey screws, depending on your choice of backing.
We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller. They also join together seamlessly if you need bigger.
The panels will be absolutely fine in these areas, as long as they are not in direct contact with water. We do recommend applying a water-resistant finish to the front of the slats to protect them against any moisture or humidity wherever possible though.
The Acupanel range is designed for interior use only.
It is straightforward to adjust the panels to fit around any object. You can cut the slats widthways with a saw, and you can cut the felt lengthways with a sharp blade to then apply around any item you may have on your surface.
You can mount the panels on all surfaces including brick, concrete and plasterboard.
The wood used is always from the same source so they will always look more or less the same. It is natural wood, however, so knots, slight cracks and colour variations can occur. Get in touch if you would like us to send you pictures of the exact batch you could potentially receive. Due to improvements in product design, as of 29th of July 2024 these panels now feature a slightly different finish from previous orders. For details or assistance, please contact our Customer Service team.
The panels have been designed to have the edge exposed. When cutting through the slats they are black throughout so an edge will always look like the rest of the panels
You certainly can!
If installing with batons, then you can use mineral wool or other sound insulation material in-between the gaps which will increase the sound absorption properties even more.
We have a range of panels available with FSC Certification. Please get in touch if you need any further information on the panels we offer with this certification.
It is always advised to finish natural wood to protect it and, more importantly, to make it look even better than it already does. We now offer a decorative satin oil-finished panel for our Contemporary Oak and Contemporary Walnut panels, to take out the hassle of finishing the panels yourself. Please note that this is a decorative finish only, providing no protection against heat, water or humidity.
We do, and we offer free delivery to mainland UK for the Acupanel range! You are also welcome to collect directly from our warehouse.
You can return unused Acupanels within 30 days after delivery.
Yes, you can purchase a sample by clicking here.
Our team are available Monday to Friday 9.00am - 5.00pm to answer any questions you may have regarding our product range.
Call us on 01525 851166.
Our sample service is the perfect way to make sure you choose the right colour for your project.
We offer a full sample refund upon your Acupanel wood panel purchase. Simply email us after placing your panel order to claim this.
Acupanel slat wood panels are ideal for both residential and commercial application, from home interior design projects to restaurant refurbishments to significant scale hotel developments.
The luxury slat wood wall panels have been carefully designed to effortlessly transform any space, enhancing the surroundings both visually and acoustically.
Acupanel's wood is sourced and produced from certified sustainable sources, while our backing felt is made from recycled materials. A complete environmentally friendly product.
The perfect solution for efficient sound absorption, as well as lowering the reverberation time of noise in your space. If installed with batons, class-A sound absorption can be achieved.
Acupanel wood slat wall and ceiling panels have been thoughtfully designed to seamlessly transform any space, enhancing the surroundings both visually and acoustically.
Simply screw the panels directly into the wall through the felt acoustic backing, or if you are looking to obtain a class A sound absorption, then you can install the panels with batons.
