Ripple 3D Paintable Wall Panels | Orac WX204
Soft repeating ripples reading like rolled water across the wall.
You need 0 panels to cover 0 m² (incl. 10% waste)
Order samples
Select the finishes you'd like to try
Other panels in this range
What you'll need

Specifications
- Pattern
- Ripple
- Range
- Orac WX204
- Material
- Purotouch® high-density polyurethane
- Finish
- Pre-primed, paintable
- Standard Panel Size
- 200cm × 25cm
- Flexibility
- Rigid
- Application
- Walls, ceilings, doors, furniture fronts, joinery
How to install
-
1
Prepare the wall
The wall should be flat, clean, dry, and dust-free. Prime any porous or chalky surfaces and fill obvious gaps before starting. The substrate does most of the work for a clean install.
-
2
Apply Decofix adhesive
Run continuous beads of Decofix Power on plain plaster, plywood, or painted surfaces. Use Decofix Ultra for difficult substrates. Apply to the back of the panel, not the wall.
-
3
Press and butt the panels
Press each panel firmly against the wall. Push the next panel tight against the previous one so the pattern continues across the join. Wipe any squeezed-out adhesive immediately.
-
4
Fill the seams with DecoFiller
Apply DecoFiller along each panel join, smooth flush with a damp finger or filling knife, and let it cure. This makes the pattern read as a single continuous surface once painted.
-
5
Sand and paint
Sand the cured filler line lightly, prime the sanded areas, then finish with any waterborne paint. Matt for soft architectural detail, eggshell or satin for higher-traffic walls.
Description
Overview The 3D Wall Covering profiles are multifunctional: cover an entire wall or ceiling to create an absolute wow effect or install the profiles as modern panelling. Achieve an incredible effect in every room, from beautiful atria and lobby walls to functional surfaces for kitchens and toilets. The panels can also be used as a door frame or be used in furniture and room elements such as cupboard doors, headboards, reception desks or a stylish bar.
WX204 Ripple reads like the pages of a good book. Its bevelled lines and origami-like folds are available in two proportions as the product can be used on both sides, the choice is yours. Ripple is one of Orac Decor’s newest 3D Wall Covering panels, now available in Duropolymer, and in a 2.6m length. Perfect to cover full ceiling heights in one go or for low wainscoting in demanding environments.
Please note this is a two-sided product, where only side A, the wider design, is primed. On side B, use two coats of final paint or apply a primer coat first, followed by the final paint, if you want this side visible. Due to the material used, we recommend when painting the WX profiles, to use a water-based paint, to prevent any design distortions.
Key Features Invisible connection points. Flexible option. Finished lateral sides. Simple to paint! Available pre-sprayed. Easy to install. Made from sustainable materials. Specification 200cm x 25cm
2000mm (H)
250mm (W)
16mm (D)
Installation & Downloads The Orac Decor® 3D Wall Covering profiles are easy to install. Download the installation below. Due to the material used, we recommend when painting the WX profiles, to use a water-based paint, to prevent any design distortions.
Installation Guide Material Datasheet Technical Drawings Videos Delivery Our Orac Decor® range is held in our warehouse. We offer a variety of shipping methods which are available on the checkout.
Delivery and returns
Delivery options and timing vary by product. View the methods available at checkout.
30-day returns on all orders
Items must be unopened and in original packaging
Contact us to arrange a return
Notify me
Architectural panels, designed to be painted.
Made by Orac in Belgium, Purotouch® is a high-density polyurethane that holds the kind of crisp detail wood and plaster cannot. Each panel arrives pre-primed at the factory, ready for the paint of your choice in any waterborne finish.
For walls, ceilings, doors, furniture fronts, and joinery work. Light enough to bond with adhesive alone, dimensionally stable in normal humidity. Repeating geometric pattern across a continuous surface, once filled and painted.
How it works
Prepare the wall
The wall should be flat, clean, dry, and dust-free. Prime any porous or chalky surfaces and fill obvious gaps before starting. The substrate does most of the work for a clean install.
Apply Decofix adhesive
Run continuous beads of Decofix Power on plain plaster, plywood, or painted surfaces. Use Decofix Ultra for difficult substrates. Apply to the back of the panel, not the wall.
Press and butt the panels
Press each panel firmly against the wall. Push the next panel tight against the previous one so the pattern continues across the join. Wipe any squeezed-out adhesive immediately.
Fill the seams with DecoFiller
Apply DecoFiller along each panel join, smooth flush with a damp finger or filling knife, and let it cure. This makes the pattern read as a single continuous surface once painted.
Sand and paint
Sand the cured filler line lightly, prime the sanded areas, then finish with any waterborne paint. Matt for soft architectural detail, eggshell or satin for higher-traffic walls.
Reviews
Frequently asked questions
Trade pricing for professionals
Dedicated pricing, priority samples and a named account manager. Apply in 30 seconds.
Request your trade account
Fill in the form or call our trade team on 01525 851166. Most accounts are approved within one working day.
Why WVH®
Founded on craft.
Built for modern design.
Decades of experience supplying surface materials to the high-end automotive and marine industry. The same obsession with grain, finish, and consistency now defines every WVH® panel.
50+ years of expertise
Three generations of surface materials knowledge behind every product
Trusted by 5,000+ homeowners
Excellent · 5,000+ reviews on Trustpilot
UK shipping, 30-day returns
Free delivery on Acupanel® and Flutto® panels. 30-day returns on every order.







