Shoe Shelf | Panel Accessories by Acupanel®

Key Features Designed and Built for Acupanel® Walls: Part of the official Acupanel® accessories range. Guaranteed to fit, no measuring against third-party products, no guesswork. Everything is designed to work together.

Designed for Footwear, Deep Enough for Boots: At 20cm deep and 46cm wide, the Shoe Shelf has the dimensions to hold a pair of boots or two pairs of shoes side by side without overhang. Screw Installation: Screws into the felt backing between the panel slats using a screwdriver or hand drill. Screws and wall plugs are included with shelf accessories. Other accessories require compatible screws, available separately.

Up to 5kg Load Capacity: Tested to hold up to 5kg. Screws directly into the felt backing between the slats.

Overview Meet the Acupanel® Shoe Shelf: a powder-coated black steel shelf designed specifically for footwear, with the depth and width to hold boots and shoes on your Acupanel® panel wall.

The Shoe Shelf is the largest shelf in the screw-based accessories range, and the only one designed around a specific use. At 46cm wide and 20cm deep, it has room for a pair of boots or two pairs of shoes sitting side by side. In an entryway it keeps footwear off the floor and on the wall, where it is accessible without being in the way. In a bedroom it is a considered storage solution that does not require a separate piece of furniture. The black powder-coated steel sits cleanly against the panel. Screws directly into the felt backing between the slats. Rated to hold up to 5kg.

Screws and wall plugs are included. Compatible with the Acupanel® Acoustic and Acupanel® Acoustic Colour ranges.

Specification 33cm x 46cm

330mm (H)
460mm (W)
200mm (D)

Max. Weight 5kg

Installation & Downloads The Acupanel® Accessories range has been designed to be installed with ease!

For accessories installed with the widget, measure and mark the shelf position on your panel wall, identifying the two slat gaps that align with the shelf’s mounting holes. Fit a widget into each gap: slide it in, rotate 90 degrees so the wings lock behind the slats. Check that both widgets are level. Slot the shelf onto the two widget stems, then tighten the screw caps. The screw caps lock the shelf firmly in place. No screws into the wall, no drilling, no mess.

For accessories installed with screws, simply attach the panel to your wall, then screw your accessory into the acoustic felt backing between the slats.

For more information on the Acupanel® Accessories range, use the technical sheet below:

Acupanel Panel Accessories Technical Sheet Delivery The Acupanel® Accessories range is fully stocked in our UK warehouse. We offer free UK mainland delivery on our Acupanel® range.